Thursday, October 10, 2013

Set 514

For first time visitors I recommend this archive for some of my best posts.





2995. 2-1/2" long, the cut-away view is for instructional purposes, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image


















2996. 24" long:


























2997. 20" long:

Larger image

























2998.

























2999. 6" long, this tool has two different uses:

Larger image




































3000. 14" long:

Larger image

















Answers:



2995. This is a bronze and tin fusible plug for a boiler (to ASME spec). It is installed in a surface where some protection from either low water or low flow could result in the overheating of the sheet by combustible gasses. Typical places would be the crown sheet of a firebox type firetube boiler, such as a locomotive, tractor, or scotch marine boiler, where low water could result in the sheet overheating and losing strength, leading to the boiler pressure distorting or bursting the sheet, or a superheater header, where reduced stem flow under fire can result in overheating. They may also be installed in the upper drum of a water tube boiler if the drum is directly exposed to the fire.

This type is installed from the fire side, and sticks up about 2" into the 'wet' side. In the event of loss of cooling due to low water or low steam flow, the tin filler melts out, hopefully prior to complete loss of cooling. This provides both some measure of pressure relief and some measure of indication to the operator that there is a problem, so he knows to shut down the fire before failure occurs. When one lets go, it is very loud.

This style is suitable to normal operating temperatures of approximately 400 degrees F, which is about 230PSIG.

Larger image


















2996. This is a dryer/stretcher for muskrat pelts:


























2997. This is the housing for a radio compass antenna for an aircraft, the antenna was used to establish the relative magnetic bearing of the plane to a radio transmitter on the ground.

Larger image

























2998. A Vendorlator 27 soft drink vending machine:




Larger image



An inside view of a similar machine:

Larger image
























2999. This is a can opener that also forms a spout in the can, patent number 2,620,557:

Larger image




































3000. This is a scribe for use by a staircase maker:

Larger image






Update:

2976. A Teles one man cross-cut saw, made by the T. L. Smith Co., London:

Larger image




This nameplate is on one of the saws shown below.








It has a spring to keep tension between the two parts:













Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.























To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.

Check out Neatorama for lots of funny T-shirts.







More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

4 comments:

  1. 2997. looks like a housing for an airplane antenna.

    2998. seems to be a brewery vending machine, for capped bottles. From a brown-shaded sugary caffeinated fizzy drinks company?

    B.

    ReplyDelete
  2. 2998. I have not seen a paddle operated vending machine since I was a kid. Thank-you.

    - Edward

    ReplyDelete
  3. 2995 is a boiler safety plug.

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete