Thursday, July 17, 2014

Set 554

For first time visitors I recommend this archive for some of my best posts.




I need to take a breaking from working on this site so there will not be any new posts for a while, I'm not sure when I'll start posting again. If you have an item that you are trying to identify, I will be happy to take a look at it. Feel free to send some photos to me at the address on my profile page.




3235. Approximately 7" long:

Larger image



Larger image





























3236. 6-1/2" long:

Larger image




















3237. 14" long:

Larger image




Larger image




Larger image


























3238. 12" long:

Larger image




























3239. Sent in by a visitor:
























3240. 16-1/2" tall, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image















Answers:



3235. This is a watch crystal gauge, used for finding the diameter and depth, patent number 412,631.

Larger image






This wooden version of it was posted here many years ago:























3236. Haven't yet found a reference for this clamp, looks like it could have been used for lifting something or attached to the flange of a beam and then used to hang a light fixture etc.

Larger image




















3237. Also haven't yet verified the purpose of this item, though it most likely would have been used with flour, sugar or any other powder type substance:

Larger image



























3238. This is a lightning rod that was attached to the top of a building:

Larger image




























3239. The tool on the left is a slide hammer that was part of a puller set, the other tool is a ball joint separator:
























3240. This is a J.C. Cox Coin Till, the main selling point for it was that it was supposed to stop mistakes and disputes about which coin was given in payment since coins from the last four transactions could be seen through the glass on the right side. The coins were dropped into a slot at the top and progressed down to the next level by means of a brass lever which moved from side to side. Finally the coins were retained in a locked box at the base. The shelves on the left were for counted stacked coins and the bowl was for miscellaneous coins.

Larger image





















Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.

















To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.
 photo set553.jpg








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, July 10, 2014

Set 553

For first time visitors I recommend this archive for some of my best posts.





3229. 20" long:




























3230. Text on it says that it holds five gallons:





















3231. 7" long:

Larger image




Larger image


























3232. Take a look at Neatorama for more guesses on this tool and a chance to win a T-shirt.

Larger image































3233. 7-1/2" long:

Larger image





























3234. 5" long:

Larger image



Larger image











Answers:





3229. This tool is for stripping the leaves from sorghum cane, patent number 61,940:

























3230. This is a can for carrying fuel. Farm tractors would burn gasoline, kerosene and other types of fuel that were delivered by trucks. For those that did not have underground storage, the fuel usually had to be carried into a small shed and poured into 50 gallon barrels. The delivery truck had a small counter mounted on it and each time a 5 gallon container was filled the counter was advanced one notch. Similar containers can be seen here.
























3231. A General Motors rear brake adjuster strut, as seen in this Mitchell service document.

Larger image




Larger image


























3232. This is a pineapple eye snip, for removing the eyes when peeling them, patent number 681,339.

Larger image































3233. No answer yet for this tool:

Larger image





























3234. Also no verifiable answer for this item:

Larger image



Larger image


















Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.

















To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.
 photo set552.jpg








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.

Thursday, July 3, 2014

Set 552

For first time visitors I recommend this archive for some of my best posts.





3223. 11" long:

Larger image




















3224. 5" long:

Larger image


























3225. 2-1/2" long:

Larger image




Larger image


























3226. 21" long, take a look at Neatorama for more guesses and a chance to win a T-shirt.

Larger image




Larger image



























3227. 7" long:

Larger image




Larger image





















3228. 10" long:

Larger image



















Answers:




3223. Haven't been able to verify any of the suggestions for this item:

Larger image




















3224. A magnetic measuring gauge, "...for determining by magnetic principles the thickness of non-magnetic plating or coating disposed upon a magnetic metallic surface; the thickness of magnetic coatings upon non-magnetic surfaces; the thickness of magnetic sheet materials, and the relative spacing between layers or sheets of magnetic materials," patent number 2,625,585:

Larger image



Larger image






























3225. This is a mainspring vise for installing the spring in a flintlock gun. Before firing the weapon, the compressed mainspring is held by the tumber, and when the trigger is pulled the power of the spring is then transmitted to the hammer.

Larger image




Larger image


























3226. This is a replica Confederate torpedo for guarding their harbors from Union ships, they "were constructed from available wooden barrels, then filled with gun powder and fitted with a contact detonator. Streamlined ends were added to lessen the effects of tides and currents. The Union Navy lost more than 40 ships to these torpedoes." The actual size of these mines was three to four feet long.

Larger image




Larger image



























3227. No answer yet for this tool that looks like it was probably home made:

Larger image




Larger image





















3228. Also no definitive answer yet for this one:

Larger image























Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.

















To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.













Last week's set is seen below, click here to view the entire post.
 photo set551.jpg








More discussion and comments on these photos can be found at the newsgroup rec.puzzles.